| irq-fix3.patch
|
| Files affected:
|   arch/arm/mach-s3c2410/irq.c |   62 	45 +	17 -	0 !
|   1 files changed, 45 insertions(+), 17 deletions(-)
|
| Ben Dooks, Thu, 07 Oct 2004 15:45:34 +0100

--- linux-2.6.9-rc3-bk5/arch/arm/mach-s3c2410/irq.c	2004-10-04 22:57:06.000000000 +0100
+++ linux-2.6.9-rc3-bk5-irqfix1/arch/arm/mach-s3c2410/irq.c	2004-10-05 15:13:58.000000000 +0100
@@ -1,7 +1,7 @@
 /* linux/arch/arm/mach-s3c2410/irq.c
  *
  * Copyright (c) 2003,2004 Simtec Electronics
- * Ben Dooks <ben@simtec.co.uk>
+ *	Ben Dooks <ben@simtec.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -27,7 +27,13 @@
  *
  *   21-Jul-2004  Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
  *                Addition of ADC/TC demux
- */
+ *
+ *   04-Oct-2004  Klaus Fetscher <k.fetscher@fetron.de>
+ *		  Fix for set_irq_type() on low EINT numbers
+ *
+ *   05-Oct-2004  Ben Dooks <ben@simtec.co.uk>
+ *		  Tidy up KF's patch and sort out new release
+*/
 
 
 #include <linux/init.h>
@@ -46,9 +52,6 @@
 #include <asm/arch/regs-irq.h>
 #include <asm/arch/regs-gpio.h>
 
-#if 0
-#include <asm/debug-ll.h>
-#endif
 
 #define irqdbf(x...)
 #define irqdbf2(x...)
@@ -195,13 +198,20 @@
 	unsigned long gpcon_offset, extint_offset;
 	unsigned long newvalue = 0, value;
 
-	if ((irq >= IRQ_EINT0) && (irq <= IRQ_EINT7))
+	if ((irq >= IRQ_EINT0) && (irq <= IRQ_EINT3))
 	{
 		gpcon_reg = S3C2410_GPFCON;
 		extint_reg = S3C2410_EXTINT0;
 		gpcon_offset = (irq - IRQ_EINT0) * 2;
 		extint_offset = (irq - IRQ_EINT0) * 4;
 	}
+	else if ((irq >= IRQ_EINT4) && (irq <= IRQ_EINT7))
+	{
+		gpcon_reg = S3C2410_GPFCON;
+		extint_reg = S3C2410_EXTINT0;
+		gpcon_offset = (irq - (EXTINT_OFF)) * 2;
+		extint_offset = (irq - (EXTINT_OFF)) * 4;
+	}
 	else if ((irq >= IRQ_EINT8) && (irq <= IRQ_EINT15))
 	{
 		gpcon_reg = S3C2410_GPGCON;
@@ -269,6 +279,13 @@
 	.type	    = s3c_irqext_type
 };
 
+static struct irqchip s3c_irq_eint0t4 = {
+	.ack	   = s3c_irq_ack,
+	.mask	   = s3c_irq_mask,
+	.unmask	   = s3c_irq_unmask,
+	.type	   = s3c_irqext_type
+};
+
 /* mask values for the parent registers for each of the interrupt types */
 
 #define INTMSK_UART0	 (1UL << (IRQ_UART0 - IRQ_EINT0))
@@ -549,6 +566,7 @@
 void __init s3c2410_init_irq(void)
 {
 	unsigned long pend;
+	unsigned long last;
 	int irqno;
 	int i;
 
@@ -556,48 +574,51 @@
 
 	/* first, clear all interrupts pending... */
 
+	last = 0;
 	for (i = 0; i < 4; i++) {
 		pend = __raw_readl(S3C2410_EINTPEND);
-		if (pend == 0)
+
+		if (pend == 0 || pend == last)
 			break;
+
 		__raw_writel(pend, S3C2410_EINTPEND);
 		printk("irq: clearing pending ext status %08x\n", (int)pend);
+		last = pend;
 	}
 
+	last = 0;
 	for (i = 0; i < 4; i++) {
 		pend = __raw_readl(S3C2410_INTPND);
-		if (pend == 0)
+
+		if (pend == 0 || pend == last)
 			break;
+
 		__raw_writel(pend, S3C2410_SRCPND);
 		__raw_writel(pend, S3C2410_INTPND);
 		printk("irq: clearing pending status %08x\n", (int)pend);
+		last = pend;
 	}
 
+	last = 0;
 	for (i = 0; i < 4; i++) {
 		pend = __raw_readl(S3C2410_SUBSRCPND);
 
-		if (pend == 0)
+		if (pend == 0 || pend == last)
 			break;
 
 		printk("irq: clearing subpending status %08x\n", (int)pend);
 		__raw_writel(pend, S3C2410_SUBSRCPND);
+		last = pend;
 	}
 
 	/* register the main interrupts */
 
 	irqdbf("s3c2410_init_irq: registering s3c2410 interrupt handlers\n");
 
-	for (irqno = IRQ_EINT0; irqno <= IRQ_ADCPARENT; irqno++) {
+	for (irqno = IRQ_BATT_FLT; irqno <= IRQ_ADCPARENT; irqno++) {
 		/* set all the s3c2410 internal irqs */
 
 		switch (irqno) {
-
-		case IRQ_EINT4t7:
-		case IRQ_EINT8t23:
-			/* these are already dealt with, so should never
-			 * appear */
-			break;
-
 			/* deal with the special IRQs (cascaded) */
 
 		case IRQ_UART0:
@@ -632,6 +653,13 @@
 
 	/* external interrupts */
 
+	for (irqno = IRQ_EINT0; irqno <= IRQ_EINT3; irqno++) {
+		irqdbf("registering irq %d (ext int)\n", irqno);
+		set_irq_chip(irqno, &s3c_irq_eint0t4);
+		set_irq_handler(irqno, do_edge_IRQ);
+		set_irq_flags(irqno, IRQF_VALID);
+	}
+
 	for (irqno = IRQ_EINT4; irqno <= IRQ_EINT23; irqno++) {
 		irqdbf("registering irq %d (extended s3c irq)\n", irqno);
 		set_irq_chip(irqno, &s3c_irqext_chip);