diff -urpN -X ../dontdiff linux-2.6.20-rc5/drivers/spi/spi_s3c24xx.c linux-2.6.20-rc5-spifix1/drivers/spi/spi_s3c24xx.c
--- linux-2.6.20-rc5/drivers/spi/spi_s3c24xx.c	2007-01-16 09:42:28.000000000 +0000
+++ linux-2.6.20-rc5-spifix1/drivers/spi/spi_s3c24xx.c	2007-01-23 10:59:38.000000000 +0000
@@ -10,9 +10,6 @@
  *
 */
 
-
-//#define DEBUG
-
 #include <linux/init.h>
 #include <linux/spinlock.h>
 #include <linux/workqueue.h>
@@ -44,6 +41,9 @@ struct s3c24xx_spi {
 	int			 len;
 	int			 count;
 
+	int			(*set_cs)(struct s3c2410_spi_info *spi,
+					  int cs, int pol);
+
 	/* data buffers */
 	const unsigned char	*tx;
 	unsigned char		*rx;
@@ -64,6 +64,11 @@ static inline struct s3c24xx_spi *to_hw(
 	return spi_master_get_devdata(sdev->master);
 }
 
+static void s3c24xx_spi_gpiocs(struct s3c2410_spi_info *spi, int cs, int pol)
+{
+	s3c2410_gpio_setpin(spi->pin_cs, pol);
+}
+
 static void s3c24xx_spi_chipsel(struct spi_device *spi, int value)
 {
 	struct s3c24xx_spi *hw = to_hw(spi);
@@ -72,10 +77,7 @@ static void s3c24xx_spi_chipsel(struct s
 
 	switch (value) {
 	case BITBANG_CS_INACTIVE:
-		if (hw->pdata->set_cs)
-			hw->pdata->set_cs(hw->pdata, value, cspol);
-		else
-			s3c2410_gpio_setpin(hw->pdata->pin_cs, cspol ^ 1);
+		hw->pdata->set_cs(hw->pdata, spi->chip_select, cspol^1);
 		break;
 
 	case BITBANG_CS_ACTIVE:
@@ -96,14 +98,9 @@ static void s3c24xx_spi_chipsel(struct s
 		/* write new configration */
 
 		writeb(spcon, hw->regs + S3C2410_SPCON);
-
-		if (hw->pdata->set_cs)
-			hw->pdata->set_cs(hw->pdata, value, cspol);
-		else
-			s3c2410_gpio_setpin(hw->pdata->pin_cs, cspol);
+		hw->pdata->set_cs(hw->pdata, spi->chip_select, cspol);
 
 		break;
-
 	}
 }
 
@@ -330,9 +327,12 @@ static int s3c24xx_spi_probe(struct plat
 	/* setup any gpio we can */
 
 	if (!hw->pdata->set_cs) {
+		hw->set_cs = s3c24xx_spi_gpiocs;
+
 		s3c2410_gpio_setpin(hw->pdata->pin_cs, 1);
 		s3c2410_gpio_cfgpin(hw->pdata->pin_cs, S3C2410_GPIO_OUTPUT);
-	}
+	} else
+		hw->set_cs = hw->pdata->set_cs;
 
 	/* register our spi controller */