diff -urpN -X ../dontdiff linux-2.6.18-rc4/include/asm-arm/arch-s3c2410/dma.h linux-2.6.18-rc4-dma6/include/asm-arm/arch-s3c2410/dma.h --- linux-2.6.18-rc4/include/asm-arm/arch-s3c2410/dma.h 2006-08-11 11:03:52.000000000 +0100 +++ linux-2.6.18-rc4-dma6/include/asm-arm/arch-s3c2410/dma.h 2006-08-11 20:43:08.000000000 +0100 @@ -1,18 +1,13 @@ -/* linux/include/asm-arm/arch-bast/dma.h +/* linux/include/asm-arm/arch-s3c2410/dma.h * - * Copyright (C) 2003,2004 Simtec Electronics + * Copyright (C) 2003,2004,2006 Simtec Electronics * Ben Dooks * - * Samsung S3C2410X DMA support + * Samsung S3C241XX DMA support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * ??-May-2003 BJD Created file - * ??-Jun-2003 BJD Added more dma functionality to go with arch - * 10-Nov-2004 BJD Added sys_device support */ #ifndef __ASM_ARCH_DMA_H @@ -21,28 +16,56 @@ #include #include "hardware.h" - /* * This is the maximum DMA address(physical address) that can be DMAd to. * */ -#define MAX_DMA_ADDRESS 0x20000000 +#define MAX_DMA_ADDRESS 0x40000000 #define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */ +/* We use `virtual` dma channels to hide the fact we have only a limited + * number of DMA channels, and not of all of them (dependant on the device) + * can be attached to any DMA source. We therefore let the DMA core handle + * the allocation of hardware channels to clients. +*/ + +enum dma_ch { + DMACH_XD0, + DMACH_XD1, + DMACH_SDI, + DMACH_SPI0, + DMACH_SPI1, + DMACH_UART0, + DMACH_UART1, + DMACH_UART2, + DMACH_TIMER, + DMACH_I2S_IN, + DMACH_I2S_OUT, + DMACH_PCM_IN, + DMACH_PCM_OUT, + DMACH_MIC_IN, + DMACH_USB_EP1, + DMACH_USB_EP2, + DMACH_USB_EP3, + DMACH_USB_EP4, + DMACH_MAX, /* the end entry */ +}; + +#define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */ /* we have 4 dma channels */ #define S3C2410_DMA_CHANNELS (4) /* types */ -typedef enum { +enum s3c2410_dma_state { S3C2410_DMA_IDLE, S3C2410_DMA_RUNNING, S3C2410_DMA_PAUSED -} s3c2410_dma_state_t; +}; -/* s3c2410_dma_loadst_t +/* enum s3c2410_dma_loadst * * This represents the state of the DMA engine, wrt to the loaded / running * transfers. Since we don't have any way of knowing exactly the state of @@ -70,44 +93,40 @@ typedef enum { * currently running. */ -typedef enum { +enum s3c2410_dma_loadst { S3C2410_DMALOAD_NONE, S3C2410_DMALOAD_1LOADED, S3C2410_DMALOAD_1RUNNING, S3C2410_DMALOAD_1LOADED_1RUNNING, -} s3c2410_dma_loadst_t; +}; -typedef enum { +enum s3c2410_dma_buffresult { S3C2410_RES_OK, S3C2410_RES_ERR, S3C2410_RES_ABORT -} s3c2410_dma_buffresult_t; - - -typedef enum s3c2410_dmasrc_e s3c2410_dmasrc_t; +}; -enum s3c2410_dmasrc_e { - S3C2410_DMASRC_HW, /* source is memory */ - S3C2410_DMASRC_MEM /* source is hardware */ +enum s3c2410_dmasrc { + S3C2410_DMASRC_HW, /* source is memory */ + S3C2410_DMASRC_MEM /* source is hardware */ }; -/* enum s3c2410_chan_op_e +/* enum s3c2410_chan_op * * operation codes passed to the DMA code by the user, and also used * to inform the current channel owner of any changes to the system state */ -enum s3c2410_chan_op_e { +enum s3c2410_chan_op { S3C2410_DMAOP_START, S3C2410_DMAOP_STOP, S3C2410_DMAOP_PAUSE, S3C2410_DMAOP_RESUME, S3C2410_DMAOP_FLUSH, - S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */ + S3C2410_DMAOP_TIMEOUT, /* internal signal to handler */ + S3C2410_DMAOP_STARTED, /* indicate channel started */ }; -typedef enum s3c2410_chan_op_e s3c2410_chan_op_t; - /* flags */ #define S3C2410_DMAF_SLOW (1<<0) /* slow, so don't worry about @@ -116,104 +135,104 @@ typedef enum s3c2410_chan_op_e s3c2410_c /* dma buffer */ -typedef struct s3c2410_dma_buf_s s3c2410_dma_buf_t; - struct s3c2410_dma_client { char *name; }; -typedef struct s3c2410_dma_client s3c2410_dma_client_t; - /* s3c2410_dma_buf_s * * internally used buffer structure to describe a queued or running * buffer. */ -struct s3c2410_dma_buf_s { - s3c2410_dma_buf_t *next; - int magic; /* magic */ - int size; /* buffer size in bytes */ - dma_addr_t data; /* start of DMA data */ - dma_addr_t ptr; /* where the DMA got to [1] */ - void *id; /* client's id */ +struct s3c2410_dma_buf; +struct s3c2410_dma_buf { + struct s3c2410_dma_buf *next; + int magic; /* magic */ + int size; /* buffer size in bytes */ + dma_addr_t data; /* start of DMA data */ + dma_addr_t ptr; /* where the DMA got to [1] */ + void *id; /* client's id */ }; /* [1] is this updated for both recv/send modes? */ -typedef struct s3c2410_dma_chan_s s3c2410_dma_chan_t; +struct s3c2410_dma_chan; /* s3c2410_dma_cbfn_t * * buffer callback routine type */ -typedef void (*s3c2410_dma_cbfn_t)(s3c2410_dma_chan_t *, void *buf, int size, - s3c2410_dma_buffresult_t result); - -typedef int (*s3c2410_dma_opfn_t)(s3c2410_dma_chan_t *, - s3c2410_chan_op_t ); - -struct s3c2410_dma_stats_s { - unsigned long loads; - unsigned long timeout_longest; - unsigned long timeout_shortest; - unsigned long timeout_avg; - unsigned long timeout_failed; +typedef void (*s3c2410_dma_cbfn_t)(struct s3c2410_dma_chan *, + void *buf, int size, + enum s3c2410_dma_buffresult result); + +typedef int (*s3c2410_dma_opfn_t)(struct s3c2410_dma_chan *, + enum s3c2410_chan_op ); + +struct s3c2410_dma_stats { + unsigned long loads; + unsigned long timeout_longest; + unsigned long timeout_shortest; + unsigned long timeout_avg; + unsigned long timeout_failed; }; -typedef struct s3c2410_dma_stats_s s3c2410_dma_stats_t; +struct s3c2410_dma_map; -/* struct s3c2410_dma_chan_s +/* struct s3c2410_dma_chan * * full state information for each DMA channel */ -struct s3c2410_dma_chan_s { +struct s3c2410_dma_chan { /* channel state flags and information */ - unsigned char number; /* number of this dma channel */ - unsigned char in_use; /* channel allocated */ - unsigned char irq_claimed; /* irq claimed for channel */ - unsigned char irq_enabled; /* irq enabled for channel */ - unsigned char xfer_unit; /* size of an transfer */ + unsigned char number; /* number of this dma channel */ + unsigned char in_use; /* channel allocated */ + unsigned char irq_claimed; /* irq claimed for channel */ + unsigned char irq_enabled; /* irq enabled for channel */ + unsigned char xfer_unit; /* size of an transfer */ /* channel state */ - s3c2410_dma_state_t state; - s3c2410_dma_loadst_t load_state; - s3c2410_dma_client_t *client; + enum s3c2410_dma_state state; + enum s3c2410_dma_loadst load_state; + struct s3c2410_dma_client *client; /* channel configuration */ - s3c2410_dmasrc_t source; - unsigned long dev_addr; - unsigned long load_timeout; - unsigned int flags; /* channel flags */ + enum s3c2410_dmasrc source; + unsigned long dev_addr; + unsigned long load_timeout; + unsigned int flags; /* channel flags */ + + struct s3c24xx_dma_map *map; /* channel hw maps */ /* channel's hardware position and configuration */ - void __iomem *regs; /* channels registers */ - void __iomem *addr_reg; /* data address register */ - unsigned int irq; /* channel irq */ - unsigned long dcon; /* default value of DCON */ + void __iomem *regs; /* channels registers */ + void __iomem *addr_reg; /* data address register */ + unsigned int irq; /* channel irq */ + unsigned long dcon; /* default value of DCON */ /* driver handles */ - s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */ - s3c2410_dma_opfn_t op_fn; /* channel operation callback */ + s3c2410_dma_cbfn_t callback_fn; /* buffer done callback */ + s3c2410_dma_opfn_t op_fn; /* channel op callback */ /* stats gathering */ - s3c2410_dma_stats_t *stats; - s3c2410_dma_stats_t stats_store; + struct s3c2410_dma_stats *stats; + struct s3c2410_dma_stats stats_store; /* buffer list and information */ - s3c2410_dma_buf_t *curr; /* current dma buffer */ - s3c2410_dma_buf_t *next; /* next buffer to load */ - s3c2410_dma_buf_t *end; /* end of queue */ + struct s3c2410_dma_buf *curr; /* current dma buffer */ + struct s3c2410_dma_buf *next; /* next buffer to load */ + struct s3c2410_dma_buf *end; /* end of queue */ /* system device */ struct sys_device dev; }; /* the currently allocated channel information */ -extern s3c2410_dma_chan_t s3c2410_chans[]; +extern struct s3c2410_dma_chan s3c2410_chans[]; /* note, we don't really use dma_device_t at the moment */ typedef unsigned long dma_device_t; @@ -226,7 +245,7 @@ typedef unsigned long dma_device_t; */ extern int s3c2410_dma_request(dmach_t channel, - s3c2410_dma_client_t *, void *dev); + struct s3c2410_dma_client *, void *dev); /* s3c2410_dma_ctrl @@ -234,7 +253,7 @@ extern int s3c2410_dma_request(dmach_t c * change the state of the dma channel */ -extern int s3c2410_dma_ctrl(dmach_t channel, s3c2410_chan_op_t op); +extern int s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op); /* s3c2410_dma_setflags * @@ -249,7 +268,7 @@ extern int s3c2410_dma_setflags(dmach_t * free the dma channel (will also abort any outstanding operations) */ -extern int s3c2410_dma_free(dmach_t channel, s3c2410_dma_client_t *); +extern int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *); /* s3c2410_dma_enqueue * @@ -273,7 +292,7 @@ extern int s3c2410_dma_config(dmach_t ch * configure the device we're talking to */ -extern int s3c2410_dma_devconfig(int channel, s3c2410_dmasrc_t source, +extern int s3c2410_dma_devconfig(int channel, enum s3c2410_dmasrc source, int hwcfg, unsigned long devaddr); /* s3c2410_dma_getposition diff -urpN -X ../dontdiff linux-2.6.18-rc4/include/asm-arm/arch-s3c2410/map.h linux-2.6.18-rc4-dma6/include/asm-arm/arch-s3c2410/map.h --- linux-2.6.18-rc4/include/asm-arm/arch-s3c2410/map.h 2006-08-11 11:03:52.000000000 +0100 +++ linux-2.6.18-rc4-dma6/include/asm-arm/arch-s3c2410/map.h 2006-08-11 20:51:37.000000000 +0100 @@ -167,6 +167,11 @@ #define S3C2440_PA_CAMIF (0x4F000000) #define S3C2440_SZ_CAMIF SZ_1M +/* AC97 */ + +#define S3C2440_PA_AC97 (0x5B000000) +#define S3C2440_SZ_AC97 SZ_1M + /* ISA style IO, for each machine to sort out mappings for, if it * implements it. We reserve two 16M regions for ISA. */ diff -urpN -X ../dontdiff linux-2.6.18-rc4/include/asm-arm/arch-s3c2410/regs-ac97.h linux-2.6.18-rc4-dma6/include/asm-arm/arch-s3c2410/regs-ac97.h --- linux-2.6.18-rc4/include/asm-arm/arch-s3c2410/regs-ac97.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.18-rc4-dma6/include/asm-arm/arch-s3c2410/regs-ac97.h 2006-08-11 20:49:22.000000000 +0100 @@ -0,0 +1,23 @@ +/* linux/include/asm-arm/arch-s3c2410/regs-ac97.h + * + * Copyright (c) 2006 Simtec Electronics + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2440 AC97 Controller +*/ + +#ifndef __ASM_ARCH_REGS_AC97_H +#define __ASM_ARCH_REGS_AC97_H __FILE__ + +#define S3C_AC97_GLBCTRL (0x00) +#define S3C_AC97_GLBSTAT (0x04) +#define S3C_AC97_CODEC_CMD (0x08) +#define S3C_AC97_PCM_ADDR (0x10) +#define S3C_AC97_PCM_DATA (0x18) +#define S3C_AC97_MIC_DATA (0x1C) + +#endif /* __ASM_ARCH_REGS_AC97_H */ diff -urpN -X ../dontdiff linux-2.6.18-rc4/arch/arm/mach-s3c2410/Kconfig linux-2.6.18-rc4-dma6/arch/arm/mach-s3c2410/Kconfig --- linux-2.6.18-rc4/arch/arm/mach-s3c2410/Kconfig 2006-08-11 11:03:37.000000000 +0100 +++ linux-2.6.18-rc4-dma6/arch/arm/mach-s3c2410/Kconfig 2006-08-13 22:37:29.000000000 +0100 @@ -125,6 +125,13 @@ config S3C2410_CLOCK help Clock code for the S3C2410, and similar processors +config CPU_S3C2410_DMA + bool + depends on S3C2410_DMA && (CPU_S3C2410 || CPU_S3C2442) + default y if CPU_S3C2410 || CPU_S3C2442 + help + DMA device selection for S3C2410 and compatible CPUs + config CPU_S3C2410 bool depends on ARCH_S3C2410 diff -urpN -X ../dontdiff linux-2.6.18-rc4/arch/arm/mach-s3c2410/Makefile linux-2.6.18-rc4-dma6/arch/arm/mach-s3c2410/Makefile --- linux-2.6.18-rc4/arch/arm/mach-s3c2410/Makefile 2006-08-11 11:03:37.000000000 +0100 +++ linux-2.6.18-rc4-dma6/arch/arm/mach-s3c2410/Makefile 2006-08-13 22:35:07.000000000 +0100 @@ -9,51 +9,61 @@ obj-y := cpu.o irq.o time.o gpio.o clo obj-m := obj-n := obj- := +obj-dma-y := +obj-dma-n := + +# DMA +obj-$(CONFIG_S3C2410_DMA) += dma.o # S3C2400 support files -obj-$(CONFIG_CPU_S3C2400) += s3c2400-gpio.o +obj-$(CONFIG_CPU_S3C2400) += s3c2400-gpio.o # S3C2410 support files -obj-$(CONFIG_CPU_S3C2410) += s3c2410.o -obj-$(CONFIG_CPU_S3C2410) += s3c2410-gpio.o -obj-$(CONFIG_S3C2410_DMA) += dma.o +obj-$(CONFIG_CPU_S3C2410) += s3c2410.o +obj-$(CONFIG_CPU_S3C2410) += s3c2410-gpio.o +obj-$(CONFIG_CPU_S3C2410_DMA) += s3c2410-dma.o # Power Management support -obj-$(CONFIG_PM) += pm.o sleep.o -obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o +obj-$(CONFIG_PM) += pm.o sleep.o +obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o # S3C2412 support -obj-$(CONFIG_CPU_S3C2412) += s3c2412.o -obj-$(CONFIG_CPU_S3C2412) += s3c2412-clock.o +obj-$(CONFIG_CPU_S3C2412) += s3c2412.o +obj-$(CONFIG_CPU_S3C2412) += s3c2412-clock.o # # S3C244X support -obj-$(CONFIG_CPU_S3C244X) += s3c244x.o -obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x.o +obj-$(CONFIG_CPU_S3C244X) += s3c244x-irq.o # Clock control -obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o +obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o # S3C2440 support -obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o -obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o -obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o -obj-$(CONFIG_CPU_S3C2440) += s3c2410-gpio.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440.o s3c2440-dsc.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440-irq.o +obj-$(CONFIG_CPU_S3C2440) += s3c2440-clock.o +obj-$(CONFIG_CPU_S3C2440) += s3c2410-gpio.o +obj-dma-$(CONFIG_CPU_S3C2440) += s3c2440-dma.o # S3C2442 support -obj-$(CONFIG_CPU_S3C2442) += s3c2442.o -obj-$(CONFIG_CPU_S3C2442) += s3c2442-clock.o +obj-$(CONFIG_CPU_S3C2442) += s3c2442.o +obj-$(CONFIG_CPU_S3C2442) += s3c2442-clock.o # bast extras obj-$(CONFIG_BAST_PC104_IRQ) += bast-irq.o +# merge in dma objects + +obj-y += $(obj-dma-y) + # machine specific support obj-$(CONFIG_MACH_ANUBIS) += mach-anubis.o diff -urpN -X ../dontdiff linux-2.6.18-rc4/arch/arm/mach-s3c2410/dma.c linux-2.6.18-rc4-dma6/arch/arm/mach-s3c2410/dma.c --- linux-2.6.18-rc4/arch/arm/mach-s3c2410/dma.c 2006-08-11 11:03:37.000000000 +0100 +++ linux-2.6.18-rc4-dma6/arch/arm/mach-s3c2410/dma.c 2006-08-13 20:36:54.000000000 +0100 @@ -1,35 +1,16 @@ -/* linux/arch/arm/mach-bast/dma.c +/* linux/arch/arm/mach-s3c2410/dma.c * - * (c) 2003-2005 Simtec Electronics + * (c) 2003-2005,2006 Simtec Electronics * Ben Dooks * * S3C2410 DMA core * - * http://www.simtec.co.uk/products/EB2410ITX/ + * http://armlinux.simtec.co.uk/ * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * Changelog: - * 27-Feb-2005 BJD Added kmem cache for dma descriptors - * 18-Nov-2004 BJD Removed error for loading onto stopped channel - * 10-Nov-2004 BJD Ensure all external symbols exported for modules - * 10-Nov-2004 BJD Use sys_device and sysdev_class for power management - * 08-Aug-2004 BJD Apply rmk's suggestions - * 21-Jul-2004 BJD Ported to linux 2.6 - * 12-Jul-2004 BJD Finished re-write and change of API - * 06-Jul-2004 BJD Rewrote dma code to try and cope with various problems - * 23-May-2003 BJD Created file - * 19-Aug-2003 BJD Cleanup, header fix, added URL - * - * This file is based on the Sangwook Lee/Samsung patches, re-written due - * to various ommisions from the code (such as flexible dma configuration) - * for use with the BAST system board. - * - * The re-write is pretty much complete, and should be good enough for any - * possible DMA function - */ +*/ #ifdef CONFIG_S3C2410_DMA_DEBUG @@ -55,12 +36,16 @@ #include #include +#include "dma.h" + /* io map for dma */ static void __iomem *dma_base; static kmem_cache_t *dma_kmem; +struct s3c24xx_dma_selection dma_sel; + /* dma channel state information */ -s3c2410_dma_chan_t s3c2410_chans[S3C2410_DMA_CHANNELS]; +struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS]; /* debugging functions */ @@ -74,12 +59,11 @@ s3c2410_dma_chan_t s3c2410_chans[S3C2410 #define dma_wrreg(chan, reg, val) writel((val), (chan)->regs + (reg)) #else static inline void -dma_wrreg(s3c2410_dma_chan_t *chan, int reg, unsigned long val) +dma_wrreg(struct s3c2410_dma_chan *chan, int reg, unsigned long val) { pr_debug("writing %08x to register %08x\n",(unsigned int)val,reg); writel(val, dma_regaddr(chan, reg)); } - #endif #define dma_rdreg(chan, reg) readl((chan)->regs + (reg)) @@ -102,7 +86,7 @@ struct s3c2410_dma_regstate { */ static void -dmadbg_capture(s3c2410_dma_chan_t *chan, struct s3c2410_dma_regstate *regs) +dmadbg_capture(struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs) { regs->dcsrc = dma_rdreg(chan, S3C2410_DMA_DCSRC); regs->disrc = dma_rdreg(chan, S3C2410_DMA_DISRC); @@ -112,7 +96,7 @@ dmadbg_capture(s3c2410_dma_chan_t *chan, } static void -dmadbg_showregs(const char *fname, int line, s3c2410_dma_chan_t *chan, +dmadbg_dumpregs(const char *fname, int line, struct s3c2410_dma_chan *chan, struct s3c2410_dma_regstate *regs) { printk(KERN_DEBUG "dma%d: %s:%d: DCSRC=%08lx, DISRC=%08lx, DSTAT=%08lx DMT=%02lx, DCON=%08lx\n", @@ -122,7 +106,7 @@ dmadbg_showregs(const char *fname, int l } static void -dmadbg_showchan(const char *fname, int line, s3c2410_dma_chan_t *chan) +dmadbg_showchan(const char *fname, int line, struct s3c2410_dma_chan *chan) { struct s3c2410_dma_regstate state; @@ -132,7 +116,16 @@ dmadbg_showchan(const char *fname, int l chan->number, fname, line, chan->load_state, chan->curr, chan->next, chan->end); - dmadbg_showregs(fname, line, chan, &state); + dmadbg_dumpregs(fname, line, chan, &state); +} + +static void +dmadbg_showregs(const char *fname, int line, struct s3c2410_dma_chan *chan) +{ + struct s3c2410_dma_regstate state; + + dmadbg_capture(chan, &state); + dmadbg_dumpregs(fname, line, chan, &state); } #define dbg_showregs(chan) dmadbg_showregs(__FUNCTION__, __LINE__, (chan)) @@ -142,12 +135,20 @@ dmadbg_showchan(const char *fname, int l #define dbg_showchan(chan) do { } while(0) #endif /* CONFIG_S3C2410_DMA_DEBUG */ -#define check_channel(chan) \ - do { if ((chan) >= S3C2410_DMA_CHANNELS) { \ - printk(KERN_ERR "%s: invalid channel %d\n", __FUNCTION__, (chan)); \ - return -EINVAL; \ - } } while(0) +static struct s3c2410_dma_chan *dma_chan_map[DMACH_MAX]; + +/* lookup_dma_channel + * + * change the dma channel number given into a real dma channel id +*/ +static struct s3c2410_dma_chan *lookup_dma_channel(unsigned int channel) +{ + if (channel & DMACH_LOW_LEVEL) + return &s3c2410_chans[channel & ~DMACH_LOW_LEVEL]; + else + return dma_chan_map[channel]; +} /* s3c2410_dma_stats_timeout * @@ -155,7 +156,7 @@ dmadbg_showchan(const char *fname, int l */ static void -s3c2410_dma_stats_timeout(s3c2410_dma_stats_t *stats, int val) +s3c2410_dma_stats_timeout(struct s3c2410_dma_stats *stats, int val) { if (stats == NULL) return; @@ -174,7 +175,7 @@ s3c2410_dma_stats_timeout(s3c2410_dma_st */ static int -s3c2410_dma_waitforload(s3c2410_dma_chan_t *chan, int line) +s3c2410_dma_waitforload(struct s3c2410_dma_chan *chan, int line) { int timeout = chan->load_timeout; int took; @@ -221,8 +222,8 @@ s3c2410_dma_waitforload(s3c2410_dma_chan */ static inline int -s3c2410_dma_loadbuffer(s3c2410_dma_chan_t *chan, - s3c2410_dma_buf_t *buf) +s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan, + struct s3c2410_dma_buf *buf) { unsigned long reload; @@ -253,10 +254,14 @@ s3c2410_dma_loadbuffer(s3c2410_dma_chan_ buf->next); reload = (buf->next == NULL) ? S3C2410_DCON_NORELOAD : 0; } else { - pr_debug("load_state is %d => autoreload\n", chan->load_state); + //pr_debug("load_state is %d => autoreload\n", chan->load_state); reload = S3C2410_DCON_AUTORELOAD; } + if ((buf->data & 0xf0000000) != 0x30000000) { + dmawarn("dmaload: buffer is %p\n", (void *)buf->data); + } + writel(buf->data, chan->addr_reg); dma_wrreg(chan, S3C2410_DMA_DCON, @@ -291,7 +296,7 @@ s3c2410_dma_loadbuffer(s3c2410_dma_chan_ */ static void -s3c2410_dma_call_op(s3c2410_dma_chan_t *chan, s3c2410_chan_op_t op) +s3c2410_dma_call_op(struct s3c2410_dma_chan *chan, enum s3c2410_chan_op op) { if (chan->op_fn != NULL) { (chan->op_fn)(chan, op); @@ -305,11 +310,13 @@ s3c2410_dma_call_op(s3c2410_dma_chan_t * */ static inline void -s3c2410_dma_buffdone(s3c2410_dma_chan_t *chan, s3c2410_dma_buf_t *buf, - s3c2410_dma_buffresult_t result) +s3c2410_dma_buffdone(struct s3c2410_dma_chan *chan, struct s3c2410_dma_buf *buf, + enum s3c2410_dma_buffresult result) { +#if 0 pr_debug("callback_fn=%p, buf=%p, id=%p, size=%d, result=%d\n", chan->callback_fn, buf, buf->id, buf->size, result); +#endif if (chan->callback_fn != NULL) { (chan->callback_fn)(chan, buf->id, buf->size, result); @@ -321,7 +328,7 @@ s3c2410_dma_buffdone(s3c2410_dma_chan_t * start a dma channel going */ -static int s3c2410_dma_start(s3c2410_dma_chan_t *chan) +static int s3c2410_dma_start(struct s3c2410_dma_chan *chan) { unsigned long tmp; unsigned long flags; @@ -370,7 +377,7 @@ static int s3c2410_dma_start(s3c2410_dma tmp |= S3C2410_DMASKTRIG_ON; dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp); - pr_debug("wrote %08lx to DMASKTRIG\n", tmp); + pr_debug("dma%d: %08lx to DMASKTRIG\n", chan->number, tmp); #if 0 /* the dma buffer loads should take care of clearing the AUTO @@ -384,7 +391,30 @@ static int s3c2410_dma_start(s3c2410_dma dbg_showchan(chan); + /* if we've only loaded one buffer onto the channel, then chec + * to see if we have another, and if so, try and load it so when + * the first buffer is finished, the new one will be loaded onto + * the channel */ + + if (chan->next != NULL) { + if (chan->load_state == S3C2410_DMALOAD_1LOADED) { + + if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { + pr_debug("%s: buff not yet loaded, no more todo\n", + __FUNCTION__); + } else { + chan->load_state = S3C2410_DMALOAD_1RUNNING; + s3c2410_dma_loadbuffer(chan, chan->next); + } + + } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) { + s3c2410_dma_loadbuffer(chan, chan->next); + } + } + + local_irq_restore(flags); + return 0; } @@ -394,7 +424,7 @@ static int s3c2410_dma_start(s3c2410_dma */ static int -s3c2410_dma_canload(s3c2410_dma_chan_t *chan) +s3c2410_dma_canload(struct s3c2410_dma_chan *chan) { if (chan->load_state == S3C2410_DMALOAD_NONE || chan->load_state == S3C2410_DMALOAD_1RUNNING) @@ -403,7 +433,6 @@ s3c2410_dma_canload(s3c2410_dma_chan_t * return 0; } - /* s3c2410_dma_enqueue * * queue an given buffer for dma transfer. @@ -424,11 +453,12 @@ s3c2410_dma_canload(s3c2410_dma_chan_t * int s3c2410_dma_enqueue(unsigned int channel, void *id, dma_addr_t data, int size) { - s3c2410_dma_chan_t *chan = &s3c2410_chans[channel]; - s3c2410_dma_buf_t *buf; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); + struct s3c2410_dma_buf *buf; unsigned long flags; - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: id=%p, data=%08x, size=%d\n", __FUNCTION__, id, (unsigned int)data, size); @@ -436,12 +466,11 @@ int s3c2410_dma_enqueue(unsigned int cha buf = kmem_cache_alloc(dma_kmem, GFP_ATOMIC); if (buf == NULL) { pr_debug("%s: out of memory (%ld alloc)\n", - __FUNCTION__, sizeof(*buf)); + __FUNCTION__, (long)sizeof(*buf)); return -ENOMEM; } - pr_debug("%s: new buffer %p\n", __FUNCTION__, buf); - + //pr_debug("%s: new buffer %p\n", __FUNCTION__, buf); //dbg_showchan(chan); buf->next = NULL; @@ -505,7 +534,7 @@ int s3c2410_dma_enqueue(unsigned int cha EXPORT_SYMBOL(s3c2410_dma_enqueue); static inline void -s3c2410_dma_freebuf(s3c2410_dma_buf_t *buf) +s3c2410_dma_freebuf(struct s3c2410_dma_buf *buf) { int magicok = (buf->magic == BUF_MAGIC); @@ -525,10 +554,12 @@ s3c2410_dma_freebuf(s3c2410_dma_buf_t *b */ static inline void -s3c2410_dma_lastxfer(s3c2410_dma_chan_t *chan) +s3c2410_dma_lastxfer(struct s3c2410_dma_chan *chan) { +#if 0 pr_debug("dma%d: s3c2410_dma_lastxfer: load_state %d\n", chan->number, chan->load_state); +#endif switch (chan->load_state) { case S3C2410_DMALOAD_NONE: @@ -537,14 +568,20 @@ s3c2410_dma_lastxfer(s3c2410_dma_chan_t case S3C2410_DMALOAD_1LOADED: if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { /* flag error? */ - printk(KERN_ERR "dma%d: timeout waiting for load\n", - chan->number); + printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n", + chan->number, __FUNCTION__); return; } break; + case S3C2410_DMALOAD_1LOADED_1RUNNING: + /* I belive in this case we do not have anything to do + * until the next buffer comes along, and we turn off the + * reload */ + return; + default: - pr_debug("dma%d: lastxfer: unhandled load_state %d with no next", + pr_debug("dma%d: lastxfer: unhandled load_state %d with no next\n", chan->number, chan->load_state); return; @@ -560,8 +597,8 @@ s3c2410_dma_lastxfer(s3c2410_dma_chan_t static irqreturn_t s3c2410_dma_irq(int irq, void *devpw, struct pt_regs *regs) { - s3c2410_dma_chan_t *chan = (s3c2410_dma_chan_t *)devpw; - s3c2410_dma_buf_t *buf; + struct s3c2410_dma_chan *chan = (struct s3c2410_dma_chan *)devpw; + struct s3c2410_dma_buf *buf; buf = chan->curr; @@ -629,7 +666,14 @@ s3c2410_dma_irq(int irq, void *devpw, st } else { } - if (chan->next != NULL) { + /* only reload if the channel is still running... our buffer done + * routine may have altered the state by requesting the dma channel + * to stop or shutdown... */ + + /* todo: check that when the channel is shut-down from inside this + * function, we cope with unsetting reload, etc */ + + if (chan->next != NULL && chan->state != S3C2410_DMA_IDLE) { unsigned long flags; switch (chan->load_state) { @@ -644,8 +688,8 @@ s3c2410_dma_irq(int irq, void *devpw, st case S3C2410_DMALOAD_1LOADED: if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { /* flag error? */ - printk(KERN_ERR "dma%d: timeout waiting for load\n", - chan->number); + printk(KERN_ERR "dma%d: timeout waiting for load (%s)\n", + chan->number, __FUNCTION__); return IRQ_HANDLED; } @@ -670,7 +714,8 @@ s3c2410_dma_irq(int irq, void *devpw, st if (chan->load_state == S3C2410_DMALOAD_NONE) { pr_debug("dma%d: end of transfer, stopping channel (%ld)\n", chan->number, jiffies); - s3c2410_dma_ctrl(chan->number, S3C2410_DMAOP_STOP); + s3c2410_dma_ctrl(chan->number | DMACH_LOW_LEVEL, + S3C2410_DMAOP_STOP); } } @@ -678,39 +723,34 @@ s3c2410_dma_irq(int irq, void *devpw, st return IRQ_HANDLED; } - +static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel); /* s3c2410_request_dma * * get control of an dma channel */ -int s3c2410_dma_request(unsigned int channel, s3c2410_dma_client_t *client, +int s3c2410_dma_request(unsigned int channel, + struct s3c2410_dma_client *client, void *dev) { - s3c2410_dma_chan_t *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan; unsigned long flags; int err; pr_debug("dma%d: s3c2410_request_dma: client=%s, dev=%p\n", channel, client->name, dev); - check_channel(channel); - local_irq_save(flags); - dbg_showchan(chan); - - if (chan->in_use) { - if (client != chan->client) { - printk(KERN_ERR "dma%d: already in use\n", channel); - local_irq_restore(flags); - return -EBUSY; - } else { - printk(KERN_ERR "dma%d: client already has channel\n", channel); - } + chan = s3c2410_dma_map_channel(channel); + if (chan == NULL) { + local_irq_restore(flags); + return -EBUSY; } + dbg_showchan(chan); + chan->client = client; chan->in_use = 1; @@ -718,11 +758,17 @@ int s3c2410_dma_request(unsigned int cha pr_debug("dma%d: %s : requesting irq %d\n", channel, __FUNCTION__, chan->irq); + chan->irq_claimed = 1; + local_irq_restore(flags); + err = request_irq(chan->irq, s3c2410_dma_irq, IRQF_DISABLED, client->name, (void *)chan); + local_irq_save(flags); + if (err) { chan->in_use = 0; + chan->irq_claimed = 0; local_irq_restore(flags); printk(KERN_ERR "%s: cannot get IRQ %d for DMA %d\n", @@ -730,7 +776,6 @@ int s3c2410_dma_request(unsigned int cha return err; } - chan->irq_claimed = 1; chan->irq_enabled = 1; } @@ -756,16 +801,16 @@ EXPORT_SYMBOL(s3c2410_dma_request); * allowed to go through. */ -int s3c2410_dma_free(dmach_t channel, s3c2410_dma_client_t *client) +int s3c2410_dma_free(dmach_t channel, struct s3c2410_dma_client *client) { - s3c2410_dma_chan_t *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); unsigned long flags; - check_channel(channel); + if (chan == NULL) + return -EINVAL; local_irq_save(flags); - if (chan->client != client) { printk(KERN_WARNING "dma%d: possible free from different client (channel %p, passed %p)\n", channel, chan->client, client); @@ -779,15 +824,19 @@ int s3c2410_dma_free(dmach_t channel, s3 /* possibly flush the channel */ s3c2410_dma_ctrl(channel, S3C2410_DMAOP_STOP); - } + } chan->client = NULL; chan->in_use = 0; if (chan->irq_claimed) free_irq(chan->irq, (void *)chan); + chan->irq_claimed = 0; + if (!(channel & DMACH_LOW_LEVEL)) + dma_chan_map[channel] = NULL; + local_irq_restore(flags); return 0; @@ -795,10 +844,10 @@ int s3c2410_dma_free(dmach_t channel, s3 EXPORT_SYMBOL(s3c2410_dma_free); -static int s3c2410_dma_dostop(s3c2410_dma_chan_t *chan) +static int s3c2410_dma_dostop(struct s3c2410_dma_chan *chan) { - unsigned long tmp; unsigned long flags; + unsigned long tmp; pr_debug("%s:\n", __FUNCTION__); @@ -810,6 +859,7 @@ static int s3c2410_dma_dostop(s3c2410_dm tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); tmp |= S3C2410_DMASKTRIG_STOP; + //tmp &= ~S3C2410_DMASKTRIG_ON; dma_wrreg(chan, S3C2410_DMA_DMASKTRIG, tmp); #if 0 @@ -819,6 +869,7 @@ static int s3c2410_dma_dostop(s3c2410_dm dma_wrreg(chan, S3C2410_DMA_DCON, tmp); #endif + /* should stop do this, or should we wait for flush? */ chan->state = S3C2410_DMA_IDLE; chan->load_state = S3C2410_DMALOAD_NONE; @@ -827,17 +878,35 @@ static int s3c2410_dma_dostop(s3c2410_dm return 0; } +void s3c2410_dma_waitforstop(struct s3c2410_dma_chan *chan) +{ + unsigned long tmp; + unsigned int timeout = 0x10000; + + while (timeout-- > 0) { + tmp = dma_rdreg(chan, S3C2410_DMA_DMASKTRIG); + + if (!(tmp & S3C2410_DMASKTRIG_ON)) + return; + } + + pr_debug("dma%d: failed to stop?\n", chan->number); +} + + /* s3c2410_dma_flush * * stop the channel, and remove all current and pending transfers */ -static int s3c2410_dma_flush(s3c2410_dma_chan_t *chan) +static int s3c2410_dma_flush(struct s3c2410_dma_chan *chan) { - s3c2410_dma_buf_t *buf, *next; + struct s3c2410_dma_buf *buf, *next; unsigned long flags; - pr_debug("%s:\n", __FUNCTION__); + pr_debug("%s: chan %p (%d)\n", __FUNCTION__, chan, chan->number); + + dbg_showchan(chan); local_irq_save(flags); @@ -864,18 +933,72 @@ static int s3c2410_dma_flush(s3c2410_dma } } + dbg_showregs(chan); + + s3c2410_dma_waitforstop(chan); + +#if 0 + /* should also clear interrupts, according to WinCE BSP */ + { + unsigned long tmp; + + tmp = dma_rdreg(chan, S3C2410_DMA_DCON); + tmp |= S3C2410_DCON_NORELOAD; + dma_wrreg(chan, S3C2410_DMA_DCON, tmp); + } +#endif + + dbg_showregs(chan); + local_irq_restore(flags); return 0; } +int +s3c2410_dma_started(struct s3c2410_dma_chan *chan) +{ + unsigned long flags; + + local_irq_save(flags); + + dbg_showchan(chan); + + /* if we've only loaded one buffer onto the channel, then chec + * to see if we have another, and if so, try and load it so when + * the first buffer is finished, the new one will be loaded onto + * the channel */ + + if (chan->next != NULL) { + if (chan->load_state == S3C2410_DMALOAD_1LOADED) { + + if (s3c2410_dma_waitforload(chan, __LINE__) == 0) { + pr_debug("%s: buff not yet loaded, no more todo\n", + __FUNCTION__); + } else { + chan->load_state = S3C2410_DMALOAD_1RUNNING; + s3c2410_dma_loadbuffer(chan, chan->next); + } + + } else if (chan->load_state == S3C2410_DMALOAD_1RUNNING) { + s3c2410_dma_loadbuffer(chan, chan->next); + } + } + + + local_irq_restore(flags); + + return 0; + +} int -s3c2410_dma_ctrl(dmach_t channel, s3c2410_chan_op_t op) +s3c2410_dma_ctrl(dmach_t channel, enum s3c2410_chan_op op) { - s3c2410_dma_chan_t *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; switch (op) { case S3C2410_DMAOP_START: @@ -885,14 +1008,15 @@ s3c2410_dma_ctrl(dmach_t channel, s3c241 return s3c2410_dma_dostop(chan); case S3C2410_DMAOP_PAUSE: - return -ENOENT; - case S3C2410_DMAOP_RESUME: return -ENOENT; case S3C2410_DMAOP_FLUSH: return s3c2410_dma_flush(chan); + case S3C2410_DMAOP_STARTED: + return s3c2410_dma_started(chan); + case S3C2410_DMAOP_TIMEOUT: return 0; @@ -921,12 +1045,19 @@ int s3c2410_dma_config(dmach_t channel, int xferunit, int dcon) { - s3c2410_dma_chan_t *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); pr_debug("%s: chan=%d, xfer_unit=%d, dcon=%08x\n", __FUNCTION__, channel, xferunit, dcon); - check_channel(channel); + if (chan == NULL) + return -EINVAL; + + printk("Initial dcon is %08x\n", dcon); + + dcon |= chan->dcon & dma_sel.dcon_mask; + + printk("New dcon is %08x\n", dcon); switch (xferunit) { case 1: @@ -961,9 +1092,10 @@ EXPORT_SYMBOL(s3c2410_dma_config); int s3c2410_dma_setflags(dmach_t channel, unsigned int flags) { - s3c2410_dma_chan_t *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: chan=%p, flags=%08x\n", __FUNCTION__, chan, flags); @@ -981,9 +1113,10 @@ EXPORT_SYMBOL(s3c2410_dma_setflags); int s3c2410_dma_set_opfn(dmach_t channel, s3c2410_dma_opfn_t rtn) { - s3c2410_dma_chan_t *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: chan=%p, op rtn=%p\n", __FUNCTION__, chan, rtn); @@ -996,9 +1129,10 @@ EXPORT_SYMBOL(s3c2410_dma_set_opfn); int s3c2410_dma_set_buffdone_fn(dmach_t channel, s3c2410_dma_cbfn_t rtn) { - s3c2410_dma_chan_t *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: chan=%p, callback rtn=%p\n", __FUNCTION__, chan, rtn); @@ -1024,13 +1158,14 @@ EXPORT_SYMBOL(s3c2410_dma_set_buffdone_f */ int s3c2410_dma_devconfig(int channel, - s3c2410_dmasrc_t source, + enum s3c2410_dmasrc source, int hwcfg, unsigned long devaddr) { - s3c2410_dma_chan_t *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; pr_debug("%s: source=%d, hwcfg=%08x, devaddr=%08lx\n", __FUNCTION__, (int)source, hwcfg, devaddr); @@ -1075,9 +1210,10 @@ EXPORT_SYMBOL(s3c2410_dma_devconfig); int s3c2410_dma_getposition(dmach_t channel, dma_addr_t *src, dma_addr_t *dst) { - s3c2410_dma_chan_t *chan = &s3c2410_chans[channel]; + struct s3c2410_dma_chan *chan = lookup_dma_channel(channel); - check_channel(channel); + if (chan == NULL) + return -EINVAL; if (src != NULL) *src = dma_rdreg(chan, S3C2410_DMA_DCSRC); @@ -1097,7 +1233,7 @@ EXPORT_SYMBOL(s3c2410_dma_getposition); static int s3c2410_dma_suspend(struct sys_device *dev, pm_message_t state) { - s3c2410_dma_chan_t *cp = container_of(dev, s3c2410_dma_chan_t, dev); + struct s3c2410_dma_chan *cp = container_of(dev, struct s3c2410_dma_chan, dev); printk(KERN_DEBUG "suspending dma channel %d\n", cp->number); @@ -1127,7 +1263,7 @@ static int s3c2410_dma_resume(struct sys #define s3c2410_dma_resume NULL #endif /* CONFIG_PM */ -static struct sysdev_class dma_sysclass = { +struct sysdev_class dma_sysclass = { set_kset_name("s3c24xx-dma"), .suspend = s3c2410_dma_suspend, .resume = s3c2410_dma_resume, @@ -1137,19 +1273,18 @@ static struct sysdev_class dma_sysclass static void s3c2410_dma_cache_ctor(void *p, kmem_cache_t *c, unsigned long f) { - memset(p, 0, sizeof(s3c2410_dma_buf_t)); + memset(p, 0, sizeof(struct s3c2410_dma_buf)); } - /* initialisation code */ static int __init s3c2410_init_dma(void) { - s3c2410_dma_chan_t *cp; + struct s3c2410_dma_chan *cp; int channel; int ret; - printk("S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics\n"); + printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n"); dma_base = ioremap(S3C24XX_PA_DMA, 0x200); if (dma_base == NULL) { @@ -1157,13 +1292,15 @@ static int __init s3c2410_init_dma(void) return -ENOMEM; } + printk("Registering sysclass\n"); + ret = sysdev_class_register(&dma_sysclass); if (ret != 0) { printk(KERN_ERR "dma sysclass registration failed\n"); goto err; } - dma_kmem = kmem_cache_create("dma_desc", sizeof(s3c2410_dma_buf_t), 0, + dma_kmem = kmem_cache_create("dma_desc", sizeof(struct s3c2410_dma_buf), 0, SLAB_HWCACHE_ALIGN, s3c2410_dma_cache_ctor, NULL); @@ -1176,7 +1313,7 @@ static int __init s3c2410_init_dma(void) for (channel = 0; channel < S3C2410_DMA_CHANNELS; channel++) { cp = &s3c2410_chans[channel]; - memset(cp, 0, sizeof(s3c2410_dma_chan_t)); + memset(cp, 0, sizeof(struct s3c2410_dma_chan)); /* dma channel irqs are in order.. */ cp->number = channel; @@ -1210,4 +1347,95 @@ static int __init s3c2410_init_dma(void) return ret; } -__initcall(s3c2410_init_dma); +core_initcall(s3c2410_init_dma); + +static inline int is_channel_valid(unsigned int channel) +{ + return (channel & DMA_CH_VALID); +} + +/* s3c2410_dma_map_channel() + * + * turn the virtual channel number into a real, and un-used hardware + * channel. + * + * currently this code uses first-free channel from the specified harware + * map, not taking into account anything that the board setup code may + * have to say about the likely peripheral set to be in use. +*/ + +struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel) +{ + struct s3c24xx_dma_map *ch_map; + struct s3c2410_dma_chan *dmach; + int ch; + + if (dma_sel.map == NULL || channel > dma_sel.map_size) + return NULL; + + ch_map = dma_sel.map + channel; + + for (ch = 0; ch < S3C2410_DMA_CHANNELS; ch++) { + if (!is_channel_valid(ch_map->channels[ch])) + continue; + + if (s3c2410_chans[ch].in_use == 0) { + printk("mapped channel %d to %d\n", channel, ch); + break; + } + } + + if (ch >= S3C2410_DMA_CHANNELS) + return NULL; + + /* update our channel mapping */ + + dmach = &s3c2410_chans[ch]; + dma_chan_map[channel] = dmach; + + /* select the channel */ + + (dma_sel.select)(dmach, ch_map); + + return dmach; +} + +static void s3c24xx_dma_show_ch(struct s3c24xx_dma_map *map, int ch) +{ + /* show the channel configuration */ + + printk("%2d: %20s, channels %c%c%c%c\n", ch, map->name, + (is_channel_valid(map->channels[0]) ? '0' : '-'), + (is_channel_valid(map->channels[1]) ? '1' : '-'), + (is_channel_valid(map->channels[2]) ? '2' : '-'), + (is_channel_valid(map->channels[3]) ? '3' : '-')); +} + +static int s3c24xx_dma_check_entry(struct s3c24xx_dma_map *map, int ch) +{ + if (1) + s3c24xx_dma_show_ch(map, ch); + + return 0; +} + +int __init s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel) +{ + struct s3c24xx_dma_map *nmap; + size_t map_sz = sizeof(*nmap) * sel->map_size; + int ptr; + + nmap = kmalloc(map_sz, GFP_KERNEL); + if (nmap == NULL) + return -ENOMEM; + + memcpy(nmap, sel->map, map_sz); + memcpy(&dma_sel, sel, sizeof(*sel)); + + dma_sel.map = nmap; + + for (ptr = 0; ptr < sel->map_size; ptr++) + s3c24xx_dma_check_entry(nmap+ptr, ptr); + + return 0; +} diff -urpN -X ../dontdiff linux-2.6.18-rc4/arch/arm/mach-s3c2410/dma.h linux-2.6.18-rc4-dma6/arch/arm/mach-s3c2410/dma.h --- linux-2.6.18-rc4/arch/arm/mach-s3c2410/dma.h 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.18-rc4-dma6/arch/arm/mach-s3c2410/dma.h 2006-08-13 19:39:28.000000000 +0100 @@ -0,0 +1,45 @@ +/* arch/arm/mach-s3c2410/dma.h + * + * Copyright (C) 2006 Simtec Electronics + * Ben Dooks + * + * Samsung S3C24XX DMA support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +extern struct sysdev_class dma_sysclass; +extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS]; + +#define DMA_CH_VALID (1<<31) + +struct s3c24xx_dma_addr { + unsigned long from; + unsigned long to; +}; + +/* struct s3c24xx_dma_map + * + * this holds the mapping information for the channel selected + * to be connected to the specified device +*/ + +struct s3c24xx_dma_map { + const char *name; + struct s3c24xx_dma_addr hw_addr; + + unsigned long channels[S3C2410_DMA_CHANNELS]; +}; + +struct s3c24xx_dma_selection { + struct s3c24xx_dma_map *map; + unsigned long map_size; + unsigned long dcon_mask; + + void (*select)(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map); +}; + +extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel); diff -urpN -X ../dontdiff linux-2.6.18-rc4/arch/arm/mach-s3c2410/s3c2410-dma.c linux-2.6.18-rc4-dma6/arch/arm/mach-s3c2410/s3c2410-dma.c --- linux-2.6.18-rc4/arch/arm/mach-s3c2410/s3c2410-dma.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.18-rc4-dma6/arch/arm/mach-s3c2410/s3c2410-dma.c 2006-08-13 22:24:56.000000000 +0100 @@ -0,0 +1,158 @@ +/* linux/arch/arm/mach-s3c2410/s3c2410-dma.c + * + * (c) 2006 Simtec Electronics + * Ben Dooks + * + * S3C2410 DMA selection + * + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include + +#include +#include +#include "dma.h" + +#include "cpu.h" + +#include +#include +#include +#include +#include +#include +#include +#include + +static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { + [DMACH_XD0] = { + .name = "xdreq0", + .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID, + }, + [DMACH_XD1] = { + .name = "xdreq1", + .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID, + }, + [DMACH_SDI] = { + .name = "sdi", + .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, + .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_SPI0] = { + .name = "spi0", + .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, + }, + [DMACH_SPI1] = { + .name = "spi1", + .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, + }, + [DMACH_UART0] = { + .name = "uart0", + .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, + }, + [DMACH_UART1] = { + .name = "uart1", + .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, + }, + [DMACH_UART2] = { + .name = "uart2", + .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, + }, + [DMACH_TIMER] = { + .name = "timer", + .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID, + .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID, + }, + [DMACH_I2S_IN] = { + .name = "i2s-sdi", + .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_I2S_OUT] = { + .name = "i2s-sdo", + .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_USB_EP1] = { + .name = "usb-ep1", + .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID, + }, + [DMACH_USB_EP2] = { + .name = "usb-ep2", + .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID, + }, + [DMACH_USB_EP3] = { + .name = "usb-ep3", + .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID, + }, + [DMACH_USB_EP4] = { + .name = "usb-ep4", + .channels[3] =S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID, + }, +}; + +static void s3c2410_dma_select(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map) +{ + chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID; +} + +static struct s3c24xx_dma_selection __initdata s3c2410_dma_sel = { + .select = s3c2410_dma_select, + .dcon_mask = 7 << 24, + .map = s3c2410_dma_mappings, + .map_size = ARRAY_SIZE(s3c2410_dma_mappings), +}; + +static int s3c2410_dma_add(struct sys_device *sysdev) +{ + return s3c24xx_dma_init_map(&s3c2410_dma_sel); +} + +static struct sysdev_driver s3c2410_dma_driver = { + .add = s3c2410_dma_add, +}; + +static int __init s3c2410_dma_init(void) +{ + return sysdev_driver_register(&s3c2410_sysclass, &s3c2410_dma_driver); +} + +arch_initcall(s3c2410_dma_init); + +/* S3C2442 DMA contains the same selection table as the S3C2410 */ + +static struct sysdev_driver s3c2442_dma_driver = { + .add = s3c2410_dma_add, +}; + +static int __init s3c2442_dma_init(void) +{ + return sysdev_driver_register(&s3c2442_sysclass, &s3c2442_dma_driver); +} + +arch_initcall(s3c2442_dma_init); + + diff -urpN -X ../dontdiff linux-2.6.18-rc4/arch/arm/mach-s3c2410/s3c2410.c linux-2.6.18-rc4-dma6/arch/arm/mach-s3c2410/s3c2410.c --- linux-2.6.18-rc4/arch/arm/mach-s3c2410/s3c2410.c 2006-08-11 11:03:38.000000000 +0100 +++ linux-2.6.18-rc4-dma6/arch/arm/mach-s3c2410/s3c2410.c 2006-08-11 20:40:28.000000000 +0100 @@ -50,6 +50,7 @@ static struct map_desc s3c2410_iodesc[] __initdata = { IODESC_ENT(USBHOST), + IODESC_ENT(USBDEV), IODESC_ENT(CLKPWR), IODESC_ENT(LCD), IODESC_ENT(TIMER), diff -urpN -X ../dontdiff linux-2.6.18-rc4/arch/arm/mach-s3c2410/s3c2440-dma.c linux-2.6.18-rc4-dma6/arch/arm/mach-s3c2410/s3c2440-dma.c --- linux-2.6.18-rc4/arch/arm/mach-s3c2410/s3c2440-dma.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.18-rc4-dma6/arch/arm/mach-s3c2410/s3c2440-dma.c 2006-08-13 19:38:51.000000000 +0100 @@ -0,0 +1,164 @@ +/* linux/arch/arm/mach-s3c2410/s3c2440-dma.c + * + * (c) 2006 Simtec Electronics + * Ben Dooks + * + * S3C2440 DMA selection + * + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include +#include + +#include +#include +#include "dma.h" + +#include "cpu.h" + +#include +#include +#include +#include +#include +#include +#include +#include + +static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { + [DMACH_XD0] = { + .name = "xdreq0", + .channels[0] = S3C2410_DCON_CH0_XDREQ0 | DMA_CH_VALID, + }, + [DMACH_XD1] = { + .name = "xdreq1", + .channels[1] = S3C2410_DCON_CH1_XDREQ1 | DMA_CH_VALID, + }, + [DMACH_SDI] = { + .name = "sdi", + .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID, + .channels[1] = S3C2440_DCON_CH1_SDI | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, + .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_SPI0] = { + .name = "spi0", + .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, + }, + [DMACH_SPI1] = { + .name = "spi1", + .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, + .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, + }, + [DMACH_UART0] = { + .name = "uart0", + .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, + }, + [DMACH_UART1] = { + .name = "uart1", + .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, + }, + [DMACH_UART2] = { + .name = "uart2", + .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, + .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, + }, + [DMACH_TIMER] = { + .name = "timer", + .channels[0] = S3C2410_DCON_CH0_TIMER | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_TIMER | DMA_CH_VALID, + .channels[3] = S3C2410_DCON_CH3_TIMER | DMA_CH_VALID, + }, + [DMACH_I2S_IN] = { + .name = "i2s-sdi", + .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, + .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_I2S_OUT] = { + .name = "i2s-sdo", + .channels[0] = S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID, + .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, + .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, + }, + [DMACH_PCM_IN] = { + .name = "pcm-in", + .channels[0] = S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID, + .channels[2] = S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID, + .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, + }, + [DMACH_PCM_OUT] = { + .name = "pcm-out", + .channels[1] = S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID, + .channels[3] = S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID, + .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, + }, + [DMACH_MIC_IN] = { + .name = "mic-in", + .channels[2] = S3C2440_DCON_CH2_MICIN | DMA_CH_VALID, + .channels[3] = S3C2440_DCON_CH3_MICIN | DMA_CH_VALID, + .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA, + }, + [DMACH_USB_EP1] = { + .name = "usb-ep1", + .channels[0] = S3C2410_DCON_CH0_USBEP1 | DMA_CH_VALID, + }, + [DMACH_USB_EP2] = { + .name = "usb-ep2", + .channels[1] = S3C2410_DCON_CH1_USBEP2 | DMA_CH_VALID, + }, + [DMACH_USB_EP3] = { + .name = "usb-ep3", + .channels[2] = S3C2410_DCON_CH2_USBEP3 | DMA_CH_VALID, + }, + [DMACH_USB_EP4] = { + .name = "usb-ep4", + .channels[3] = S3C2410_DCON_CH3_USBEP4 | DMA_CH_VALID, + }, +}; + +static void s3c2440_dma_select(struct s3c2410_dma_chan *chan, + struct s3c24xx_dma_map *map) +{ + chan->dcon = map->channels[chan->number] & ~DMA_CH_VALID; +} + +static struct s3c24xx_dma_selection __initdata s3c2440_dma_sel = { + .select = s3c2440_dma_select, + .dcon_mask = 7 << 24, + .map = s3c2440_dma_mappings, + .map_size = ARRAY_SIZE(s3c2440_dma_mappings), +}; + +static int s3c2440_dma_add(struct sys_device *sysdev) +{ + return s3c24xx_dma_init_map(&s3c2440_dma_sel); +} + +static struct sysdev_driver s3c2440_dma_driver = { + .add = s3c2440_dma_add, +}; + +static int __init s3c2440_dma_init(void) +{ + return sysdev_driver_register(&s3c2440_sysclass, &s3c2440_dma_driver); +} + +arch_initcall(s3c2440_dma_init); +